Temperature Fields in Workpieces during Grinding-Hardening with Dry Air and Liquid Nitrogen as the Cooling Media
by Thai Nguyen, Liang Chi Zhang | Page 3
abstract |
Research on Microscopic Grain-Workpiece Interaction in Grinding through Micro-Cutting Simulation, Part 1: Mechanism Study
by Xue Kun Li, Lan Yan, Waleed Bin Rashid, Yi Ming Rong | Page 9
abstract |
Research on Microscopic Grain-Workpiece Interaction in Grinding through Micro-Cutting Simulation, Part 2: Factorial Study
by Lan Yan, Xue Kun Li, Feng Jiang, Zhi Xiong Zhou, Yi Ming Rong | Page 15
abstract |
Effects of Vibration-Assisted Grinding on Wear Behavior of Vitrified Bond Al2O3 Wheel
by Taghi Tawakoli, Engelbert Westkämper, Bahman Azarhoushang | Page 21
abstract |
Influence of Particle Effects on the Material Removal Rate Utilizing Electrokinetic Phenomenon
by C.S. Leo, T.L. Blackburn, D.L. Butler, Sum Huan Ng, C. Yang, Steven Danyluk | Page 27
abstract |
Diamond Tools for the Grinding of Complex Ceramic Implant Surfaces
by Berend Denkena, Marijke van der Meer | Page 33
abstract |
Optimization of Coated SiC Belt Grinding of Alumina Ceramics
by Xavier Kennedy, S. Gowri | Page 38
abstract |
Development of CBN Internal Grinding Machine for Precision Grinding of the Air-Conditioner Compressor Piston Hole
by Y.G. Zheng, W.G. Liu, Bin Jiang, Hang Gao, S.G. Zheng | Page 43
abstract |
Surface Characteristics and Roughness Prediction of TC4 Titanium Alloy in High Speed Grinding
by Shao Hui Yin, Kun Tang, Xiao Min Sheng, Yong Jian Zhu, Y.F. Fan | Page 49
abstract |
Experimental Research of Grinding Force and Specific Grinding Energy of TC4 Titanium Alloy in High Speed Deep Grinding
by Xiao Min Sheng, Kun Tang, Jian Wu Yu, Hai Qing Mi | Page 55
abstract |
Experiment Research on the Temperature Field and Thermal Error Distribution of NC Grinding Machine
by Ya Dong Gong, Yan Guang Bai, Yue Ming Liu, Jian Qiu | Page 61
abstract |
Remote Fault Diagnosis System of Ultrahigh Speed Grinding Based on Multi-Agent
by Wan Shan Wang, Tian Biao Yu | Page 67
abstract |
Research on the Heat Partition Ratios in Grinding Area
by Suo Xian Yuan, Ming Hu, Guang Qi Cai | Page 72
abstract |
ELID Assisted Grinding of Optical Glass with Fine and Coarse Grained Copper-Resin Bonded Diamond Wheels
by Qing Liang Zhao, Jun Yun Chen, Jun Yao | Page 76
abstract |
Molecular Dynamics Simulation of Chemo-Mechanical Grinding (CMG) by Controlling Interatomic Potential Parameters to Imitate Chemical Reaction
by Jun Shimizu, Li Bo Zhou, Takeyuki Yamamoto | Page 82
abstract |
Optimization of Cutting Edge Truncation Depth for Ultrasonically Assisted Grinding to Finish Mirror Surface
by Keisuke Hara, Hiromi Isobe, Akira Kyusojin | Page 88
abstract |
Improvement of Grindactivity by Dressless Wheel Treatment in Dry Grinding of Carbon
by Kazuhito Ohashi, Y. Sumimoto, Y. Fujita, Shinya Tsukamoto | Page 94
abstract |
Prediction of Surface Roughness by 3D-CAD Model in Helical Scan Grinding and Groove Grinding
by Manabu Iwai, Yoichi Shiraishi, Shinichi Ninomiya, Tetsutaro Uematsu, Kiyoshi Suzuki | Page 101
abstract |
Measurement of the Tangential Grinding Force Using the Slip of an Induction Motor-Construction of the Measurement System
by Kazuki Kondo, Shin-Ichi Tooe | Page 107
abstract |
Investigation of the Grinding Wheel Air Boundary Layer Flow
by H. Wu, M.N. Morgan, Bin Lin | Page 113
abstract |
The Effect of Special Structured Electroplated CBN Wheel in Dry Grinding of 100Cr6
by Mohammad Rabiey, Taghi Tawakoli, K. Wegener | Page 119
abstract |
Wear of a Brazed Diamond Grinding Wheel with Diamond Grits Covered with Brazing Alloy
by Guo Qin Huang, Hei Jie Chen, Hui Huang, Xi Peng Xu | Page 125
abstract |
Preparation of Brazed CBN Abrasive Tools Using Composite Fillers of AgCuTi Alloy and TiB2 Particles
by Wen Feng Ding, Jiu Hua Xu, Z.Z. Chen, Hong Hua Su, Yu Can Fu | Page 131
abstract |
Contact Stiffness of Grinding Wheels due to the Difference of Table Feed Rate
by Takazo Yamada, Hwa Soo Lee, Kohichi Miura | Page 137
abstract |
Estimation Method of Grain-Height Distribution Based on the Working Surface Profile of Grinding Wheels
by Haruhisa Sakamoto, Shinji Shimizu, Shinichi Kashiwabara, Hitoshi Tsubakiyama | Page 143
abstract |
Quantification Method of Cutting-Edge Density Considering Grain Distribution and Grinding Mechanism
by Haruhisa Sakamoto, Hitoshi Tsubakiyama, Shinji Shimizu, Shinichi Kashiwabara | Page 149
abstract |
Estimation of Grinding Wheel Performance by Dressing Force Measurement
by Yasushi Mochida, Akihiko Kubo, Junichi Tamaki, Takao Nishioka | Page 155
abstract |
Effect of the Coolant Lubricant Type and Dress Parameters on CBN Grinding Wheels Performance
by Taghi Tawakoli, Abdolreza Rasifard, Alireza Vesali | Page 163
abstract |
Vibrations Representation in Grinding Wheels' Virtual Truing and Dressing Model
by Zbigniew M. Bzymek, Glenn M. Duzy, Richard B. Mindek | Page 169
abstract |
Estimation of Dressing Effects in Chemical Mechanical Polishing with Sorts of Diamond Dressers
by Kuen Ren Chen, Hong Tsu Young | Page 175
abstract |
by Research on Electrical Discharge Truing for Precision Profile Grinding with Cast Iron-Bonded Diamond Wheel
by Wei Li, Bao Gong Geng, Zhi Yang Song, Hai Hui Zheng | Page 181
abstract |
Development and Application of a Micro-Honing-Tool
by Shun Tong Chen, Ming Chie Yeh | Page 189
abstract |
Investigation of the Wear of the Pad Conditioner in Chemical Mechanical Polishing Process
by Yunn Shiuan Liao, C.T. Yang | Page 195
abstract |
Dressing Behaviors of PCD Conditioners on CMP Polishing Pads
by M.Y. Tsai, James C. Sung | Page 201
abstract |
A Study of Thermal-Chemical Polishing for CVD Diamond Thin Films
by Pei Lum Tso, Thing Ming Wang | Page 207
abstract |
A Briefing on the Manufacture of Hip Joint Prostheses
by Liang Chi Zhang, E.C.S. Kiat, A. Pramanik | Page 212
abstract |
The Computer-Controlled Chemical Polishing Techniques for Precision Optics
by Qiao Xu, Jian Wang, Jing Hou | Page 217
abstract |
Anisotropic Analysis on Processed Surface of KDP Single Crystals
by Chun Peng Lu, Hang Gao, Ben Wang, Qiang Guo Wang, Xiao Ji Teng, Bi Ling Wang | Page 223
abstract |
Influence of Abrasive on Planarization Polishing with the Tiny-Grinding Wheel Cluster Based on the Magnetorheological Effect
by Qiu Sheng Yan, Yong Yang, Jia Bin Lu, Wei Qiang Gao | Page 229
abstract |
Experimental Study on Polishing Characteristics of Ultrasonic- Magnetorheological Compound Finishing
by Fei Hu Zhang, Xing Bin Yu, Yong Zhang, Yong Yong Lin, Dian Rong Luan | Page 235
abstract |
Theoretical and Experimental Research on the Material Removal Rate in Ultrasonic Aided Lapping of ZTA Ceramic
by Feng Jiao, Bo Zhao | Page 240
abstract |
Effects of Horizontal Vibration Assistance on Surface Roughness in Magnetic Abrasive Finishing
by Shao Hui Yin, Yu Wang, Han Huang, Yong Jian Zhu, Yu Feng Fan, Yue Chen | Page 246
abstract |
Deep Hole Honing Based on Squeeze Film Damping Technology
by Tian Biao Yu, Ya Dong Gong, Wan Shan Wang | Page 252
abstract |
Processing of WC-Co Cemented Carbide Ball by EDR and RDP Lapping Modes
by Ju Long Yuan, Fan Yang, Zhi Wei Wang, Ke Feng Tang, Jia Jie Chen | Page 258
abstract |
258
by An Analytical Solution for Parameter Selection for Polishing Spherical Surfaces
H.F. Li, R.H. Bao, Liang Chi Zhang | Page 264
abstract |
A Study on a Polishing Process of Cr12 Hardening Steel with the Embedded Combined Tools
by G.Y. Liu, Z.N. Guo, J.W. Liu | Page 270
abstract |
Study on a Magnetic Deburring Method by the Application of the Plane Magnetic Abrasive Machining Process
by Y. Zou, Takeo Shinmura, F. Wang | Page 276
abstract |
Study on Lapping and Constant-Pressure Grinding of Single-Crystal SiC
by Keishi Yamaguchi, Mutsumi Touge, Takayuki Nakano, Junji Watanabe | Page 282
abstract |
Study of Three-Dimensional Polishing Using Magnetic Compound Fluid (MCF)
by
Takashi Sato, Yong Bo Wu, Wei Min Lin, Kunio Shimada | Page 288
abstract |
Study on Magnetic Field Distribution in the Container of Magnetic Barrel Finishing Machine
by Y. Zhang, Masato Yoshioka, Shin-Ichiro Hira | Page 294
abstract |
Finishing Characteristics in Barrel Finishing of Centrifugal Disc Type on Flow-Through System
by Koichi Kitajima, Akihiro Yamamoto, Shinji Takahashi, Masatomo Watanabe | Page 300
abstract |
Study on On-Machine Deburring for Narrow Slits Made by Laser Cutting
by Masayuki Nunobiki, Koichi Okuda, Yosuke Kitsugi | Page 306
abstract |
Simulation of Planarization of Rectangular Glass Plate Using Tool-Path-Control-Type Polishing
by Kenichiro Yoshitomi, Atsunobu Une, Masaaki Mochida | Page 313
abstract |
Electric Field-Assisted Glass Polishing Using Electro-Rheological Gel Pad
by Yasuhiro Kakinuma, Singo Takezawa, Tojiro Aoyama, Katsutoshi Tanaka, Hidenobu Anzai | Page 319
abstract |
Dynamic Friction Polishing Method Utilizing Resistance Heating for Efficient Removal of Electrically Conductive Diamond
by Kiyoshi Suzuki, Manabu Iwai, Shinichi Ninomiya, Tetsutaro Uematsu | Page 325
abstract |
by The Detailed Performance of MCF Polishing Liquid in Nano-Precision Surface Treatment of Acrylic Resin
by Yong Bo Wu, Takashi Sato, Wei Min Lin, K. Yamamoto, Kunio Shimada | Page331
abstract |
Page Polishing of Nickel Cylinder Using a Photocatalyst and >Fluorescent Substance Excited by an Ultraviolet Ray
by Takeshi Tanaka | Page 337
abstract |
A Study on Nozzle Wear Modeling in Abrasive Waterjet Cutting
by Vu Ngoc Pi, Nguyen Quoc Tuan | Page 345
abstract |
Necessary Cutting Energy in Abrasive Waterjet Machining
by Vu Ngoc Pi, Nguyen Quoc Tuan | Page 351
abstract |
Modeling Material Removal in Fracture Erosion for Brittle Materials by Abrasive Waterjet
by Hong Tao Zhu, Chuan Zhen Huang, Jun Wang, Guo Qun Zhao, Quan Lai Li | Page 357
abstract |
by Abrasive Technology in Ceramic Restorative Dentistry
Ling Yin | Page 363
abstract |
The Microchannel of Microfluidic Chip Fabrication by Micro-Powder Blasting
by Chiung Fang Huang, Yung Kang Shen, Yi Lin, Chi Wei Wu | Page 367
abstract |
Study on Micro Blasting of Glass for Micro Channel Forming
by Shigeomi Koshimizu | Page 373
abstract |
The Study on the Abrasion Characteristic of Wafer Surface According to Machining Condition
by Eun Sang Lee, Jong Koo Won, Jung Taik Lee, Hon Zong Choi | Page 381
abstract |
Nanoscratching-Induced Phase Tansformation of Monocrystalline Silicon - The Depth-of-Cut Effect
by Kausala Mylvaganam, Liang Chi Zhang | Page 387
abstract |
Determination of Elastic Modulus of Thin Coating Materials Using Nanoindentation and Finite Element Analysis
by Sheng Liu, Yuan Tong Gu, Han Huang | Page 392
abstract |
A Note on the Unloading Behavior of Silicon Subjected to Nanoindentation
by Li Chang, Liang Chi Zhang | Page 398
abstract |
Deformation and Acoustic Emission during Nanoindentation on Single Crystal MgO (001) Plane
by Zhi Gang Dong, Han Huang, Ren Ke Kang | Page 404
abstract |
Analysis of Fixed Abrasive Pads with a Nano-Sized Diamond for Silicon Wafer Polishing
by Cheng Yi Shih, Pei Lum Tso, James C. Sung | Page 410
abstract |
Laser Micromachining of Silicon Substrates
by V. Tangwarodomnukun, Jun Wang | Page 416
abstract |
Chip Size Estimation for Effective Blending Ratio of Slurries in Wire Sawing of Silicon Wafers for Solar Cells
by Chao Chang A. Chen, Bing Lin Kuo, Jiun Shuo Liang | Page 422
abstract |
Effects of Sodium Carbonate and Ceria Concentration on Chemo-Mechanical Grinding of Single Crystal Si Wafer
by H. Takahashi, Y.B. Tian, J. Sasaki, Jun Shimizu, Li Bo Zhou, Y. Tashiro, Hisao Iwase, Sumio Kamiya | Page 428
abstract |
A Novel Single Step Thinning Process for Extremely Thin Si Wafers
by Y.B. Tian, Li Bo Zhou, Jun Shimizu, H. Sato, Ren Ke Kang | Page 434
abstract |
Blasting of Affected Layer of Silicon Surface Sliced by Wire EDM
by Hirofumi Hidai, Taro Sugita, Hitoshi Tokura | Page 440
abstract |
Modeling and Analysis of Effects of Machine Tool Stiffness and Cutting Path Density on Infeed Surface Grinding of Silicon Wafer
by Li Bo Zhou, Takahito Mitsuta, Jun Shimizu, Takuji Tajima | Page 445
abstract |
Processing Grinding-Damaged Silicon Wafers by High-Frequency Nano-Second Laser Irradiation
by Ji Wang Yan, Sei Ya Muto, Tsunemoto Kuriyagawa | Page 451
abstract |
Measuring Surface Uniformity in Chemical Mechanical Polishing
by Jae Won Baik, Chang Wook Kang | Page 459
abstract |
Abrasive Surfaces Measured by Digital Optical Stereopsis
by Dennis De Pellegrin, Andrew Torrance | Page 465
abstract |
The Effect of Cooling Lubrication Methods on Surface Roughness Measured by the White Light Interferometer
by Feng Jiang, Jian Feng Li, Jie Sun, Song Zhang | Page 471
abstract |
Fabrication of Aspheric Micro Lens Array by Slow Tool Servo
by Chun Chieh Chen, Choung Lii Chao, Wei Yao Hsu, Fong Chi Chen, Chung Woei Chao | Page 479
abstract |
Fundamentals of BK7 Glass Removal in Micro/Nano-Machining
by Ming Chen, Qing Long An, Wei Min Lin, Hitoshi Ohmori | Page 485
abstract |
The Experimental Research on Small Hole Machining in Glass Using Diamond Abrasive Core-Tools
by Yan Ming Quan, Liang Liang, Wen Wang Zhong | Page 491
abstract |
Fabrication of Carbon Nanotube Probes in Atomic Force Microscopy
by Zong Wei Xu, Feng Zhou Fang, Xiao Tang Hu | Page 497
abstract |
A Study of Carbon Nanotubes as Cutting Grains for Nano Machining
by J. You, Y. Gao | Page 502
abstract |
Study on Unique Cutting Phenomena in Micro Endmilling - Mechanism and Possibility to Occur-
by Mitsuyoshi Nomura, Takahiro Kawashima, Takayuki Shibata, Yoshihiko Murakami, Masami Masuda, Osamu Horiuchi | Page 508
abstract |
An Approach for Improvement of Machining Accuracy in Micro End Milling
by Hideki Shibahara, Mikito Kumagai, Seido Kohda, Koichi Okuda | Page 514
abstract |
Evaluation of GMR Head Durability against Nanoscale Scratches Using High-Field Transfer Curves
by Hideaki Tanaka, Hiromu Chiba, Yukio Maeda | Page 520
abstract |
Study on Replication of Micro Channel Structures onto Polytetrafluoroethylene (PTFE) Substrate Employing Two-Stage Hot Embossing
by Shin-Ichiro Hira, Masato Yoshioka, Zhu Qing Wang, Yu Zhang, Yutaka Nobukawa | Page 526
abstract |
Effects of Machining Parameters on Surface Roughness in Microturning of OFHC Copper
br P. Ranjith kumar, S. Gowri | Page 532
abstract |
Surface Profile Simulation during Plane Strain Compression by Crystal Plasticity Finite Element Method
by He Jie Li, Zheng Yi Jiang, Dong Bin Wei, Yan Bing Du, Jing Tao Han, Anh Kiet Tieu | Page 538
abstract |
Analysis of Surface Roughness of Low Carbon Steel during Cold Rolling of Thin Strip
by H.B. Xie, Zheng Yi Jiang, Yan Bing Du, Dong Bin Wei, Anh Kiet Tieu | Page 544
abstract |
Mechanics of Scratch Marks in Cold Rolling of Thin Strip
by Zhen Hua Bai, Xiao Zhong Du, Zheng Yi Jiang, Anh Kiet Tieu, Jun Xu | Page 548
abstract |
Analysis of Surface Temperature and Thermal Stress Field of Slab Continuous Casting
by X.Z. Zhang, Zheng Yi Jiang, Anh Kiet Tieu, Hong Tao Zhu, Z.W. Tian | Page 554
abstract |
Finite Element Simulation of Mix Driven by Electroosmotic Flow in Microchannels
by Ying Liu, Zhong Nian Ge | Page 560
abstract |
Modeling and Optimization of Process Parameters in Micro Wire EDM by Genetic Algorithm
by K.P. Somashekhar, N. Ramachandran, Jose Mathew | Page 566
abstract |
Study on Parametric Influence, Optimization and Modeling in Micro WEDM of Ti Alloy
by R. Vijayaraj, S. Gowri, A.S.S. Balan | Page 571
abstract |
Fabrication of Multiple Micro-Grooves by Ultrasonic Machining with a Tool that Laminated Thin Hard-Material and Thin Soft-Material
by Jun Shinozuka | Page 577
abstract |
Towards Improving Rock Cutting Tools Using Thermally Stable Diamond Composites
by Habib Alehossein, Xing S. Li, Jim N. Boland | Page 585
abstract |
Rapid Estimation of Rock Cuttability Using Fracture Toughness and Rock Strength
by Bulent Tiryaki, Ian D. Gipps, Xing S. Li | Page 591
abstract |
Cutting Edge Preparation for Cemented Carbide Milling Tools
by Berend Denkena, Luis de Leon, Jens Köhler | Page 597
abstract |
A Study of the Grinding Alumina for the Multi-Point Diamond Tools
by Shenq Yih Luo, Ching Win Shih, M.H. Chen | Page 603
abstract |
Effect of Microstructure on Mechanical Properties and Wear Characteristics of Cemented Tungsten Carbides
by H.Q. Sun, R. Irwan, Han Huang, Gwidon W. Stachowiak | Page 609
abstract |
Surface Integrity in Electrical Discharge Machining of Ti-6Al-4V
by Jian Wu Yu, Peng Xiao, Yu Shan Liao, Min Cheng | Page 613
abstract |
Effect of Helical Drill Points on Delamination in Drilling Carbon Fiber Reinforced Plastics (CFRP)
By Ping Zou, X.L. Yang, Xi You Li | Page 618
abstract |
Dynamics and Stability of Milling Process Considering the Gyroscopic Effects
by Shan Shan Sun, W.X. Tang, H.F. Huang, X.Q. Xu | Page 624
abstract |
Research of Pulse Inversion Power Supply of ECM and its Techniques
by Yong Jun Zhang, Yong Jun Tang, Zhong Ning Guo, Xiao Kang Liu, Feng Li | Page 630
abstract |
A Preliminary Study of Variable Strength Activation of Coolant for Precision Machining
by Y. Gao, S. Zhou, Y. Zhang | Page 635
abstract |
Test of Focusing and Superposition for Variable Strength Activation of Coolant in Precision Machining
by Y. Zhang, S. Zhou, Y. Gao | Page 641
abstract |
Electrode Design for Oscillating EDM
by Yuki Nakamura, Tutik Sriani, Hideki Aoyama | Page 645
abstract |
Purification Effect of Micro Bubble Coolant
by Shinichi Ninomiya, Manabu Iwai, Toshiharu Shimizu, Tetsutaro Uematsu, Kiyoshi Suzuki | Page 651
abstract |
by Effects of Combined Ultrasonic Vibration during the Sinking EDM Process for Cemented Carbide
by Chaiya Praneetpongrung, Yasushi Fukuzawa, Shigeru Nagasawa | Page 657
abstract |
Study on Precision Machine Table Equipped with Constant-Flow Hydrostatic Water Bearings
by Akinori Yui, Shigeki Okuyama, Takayuki Kitajima, Etsuo Fujita, Alexander Henry Slocum, Gerald Rothenhofer | Page 664
abstract |
Development and Application of CSD Diamond Abrasives
by Qin Sheng Wang, Cun Liang, Qing Guo Zhao | Page 673
abstract |
Developments of Industrial Diamond Industry in China
by Zhi Hong Li, Pan Jia, Liang Li | Page 678
abstract |
Development of New PCD Made Up of Boron Doped Diamond Particles and its Machinability by EDM
by Kiyoshi Suzuki, Yoichi Shiraishi, Nobuhiro Nakajima, Manabu Iwai, Shinichi Ninomiya, Yukinori Tanaka, Tetsutaro Uematsu | Page 684
abstract |
Micro-Raman Stress Investigation of Polycrystalline Diamond Compact (PDC)
by Guo Ping Xu, Gen Xu, Zhi Min Yin, Rong Chao Jiang | Page 690
abstract |
Control of the Behavior of Abrasive Grains by the Effect of Electrorheological Fluid Assistance - Study on Electrorheological Fluid-Assisted Micro Ultrasonic Machining -
by T. Tateishi, K. Shimada, Nobuhito Yoshihara, Ji Wang Yan, Tsunemoto Kuriyagawa | Page 696
abstract |
Low Cost Wear Monitoring of Bearing Shell in Connecting Rod via I-kaz Method
by M.J. Ghazali, M.Z. Nuawi, N.I.I. Mansor | Page 702
abstract |
High Temperature Interfacial Reaction between Glass Gobs and Sol-Gel Coated Al2O3 Films
by His Hsin Chien, Kung Jeng Ma, SV Prabhakar Vattikuti, Chien Hung Kuo, Zen Bong Huo, Choung Lii Chao | Page 708
abstract |
The Effects of Shear Stress on the Lubrication Performances of Oil Film of Large-Scale Mill Bearing
by Jian Mei Wang, Qing Xue Huang, Zheng Yi Jiang, Kiet A. Tieu | Page 713
abstract |
Study on Mechanical Properties and Size Effect of Si3N4 Using Discrete Element Method
by Yuan Qiang Tan, Sheng Qiang Jiang, Cai Li, Dong Min Yang, Gao Feng Zhang, Y. Sheng | Page 719
abstract |
Study on Path Control Scheme by Laplacian Potential Field and Configuration Space for Vision Guided Micro Manipulation System
by Hirotako Ojima, Yoshitaka Yanai, Li Bo Zhou, Jun Shimizu | Page 725
abstract |
