Burrs Analysis, Control and Removal Burrs-Analysis, Control and Removal
Proceedings of the CIRP International Conference on Burrs, 2nd-3rd April, 2009, University of Kaiserslautern, Germany
Editors: Aurich, Jan C.; Dornfeld, David (Eds.)
2010, 254 p. 353 illus., Hardcover
ISBN: 978-3-642-00567-1
$180 + Shipping Through AES
Order online
Table of Contents


bkburrsimg1.jpg - 19056 Bytes    bkburrsimg1.jpg - 19056 Bytes    bkburrsimg1.jpg - 19056 Bytes      bkburrsimg1.jpg - 19056 Bytes    bkburrsimg1.jpg - 19056 Bytes
NOTES.
The International Conference on Analysis, Control and Removal of Burrs documents the end of a three-year cycle of the CIRP working group on Burrs. In that cycle researchers and experts from industry contributed and gathered knowledge on research and industrial practices on burrs, edge conditions and part cleanliness. A CIRP round robin of participants in many countries compared methods of burr measurement. The conference brought together people from around the world to discuss the state of the art in research and industrial applications for a conference with a special workshop character. As the contents of this book reflects, the conference was a forum for intense exchange of concepts and methods, dissemination of technical breakthroughs, and discussion of future efforts. The conference program and this compilation of presentations covers a spectrum of topics ranging from standards for burr description and classifcation to the mechanics of burr formation for modeling and simulation to burr control and deburring strategies. Materials include a keynote presentations by Prof. Dornfeld from UC Berkeley, USA, Prof. Biermann from TU Dortmund, Germany, Berger from Daimler, Germany, and Dr. Martinsen from RTIM, Norway, each giving a unique insight into research, industrial applications and the economic impact of burrs upon industry.

TABLE OF CONTENTS
TitlePage

A Review of Burr Formation in Machining
D. Dornfeld and S. Min
3
Burr Minimization Strategies in Machining Operations
D. Biermann and M. Heilmann
13
Burr Formation and Avoidance for Robust Circular Blade Sawing of Thin Walled Extruded Aluminum Profiles
K. Martinsen and G. Ringen
21
Mechanics, Modeling and Simulation of Burr Formation Burr and Cap Formation by Orbital Drilling of Aluminum
E. Brinksmeier and S. Fangmann
31
Cutting Force Model for Analysis of Burr Formation in Drilling Process
T. Matsumura and J. Leopold
47
Burr Formation in Microstructuring Processes
B. Denkena, L. de Leon, J. Kästner
55
Analytical Modeling and Experimental Investigation of Burr Formation in Grinding
H. Sudermann, I.G. Reichenbach J.C. Aurich
63
Developing a Process Model for Abrasive Flow Machining
E. Uhlmann, V. Mihotovic, H. Szulczynski, M. Kretzschmar
73
Modeling and Simulation of Burr Formation: State-of-the-Art and Future Trends
J. Leopold, R. Wohlgemuth
79
Burr and Chip Formation Mechanisms Interfacial Burr Formation in Drilling of Stacked Aerospace Materials
S.N. Melkote, T.R. Newton, C. Hellstern, J.B. Morehouse, S. Turner
89
Burr Formation in Drilling Intersecting Holes
L. Leitz, V. Franke, J.C. Aurich
99
Chip Breakage Prediction by a Web-based Expert System
F. Klocke, D. Lung, C. Essig
107
Parameters with Influence on Burr Formation Size Effects in Drilling Burr Formation
R.Neugebauer,G.Schmidt, M.Dix
117
Burr Formation and Surface Characteristics in Micro-End Milling of Titanium
G.M.Schueler,J.Engmann,T.Marx,R.Haberl , J.C.Aurich
129
Influence of Minimum Quantity Lubrication on Burr Formation in Milling
U.Heisel,M.Schaal, G.Wolf
139
Burr Formation and Removal at Profile Grinding of Riblet Structures
B.Denkena,L.deLeon, B.Wang
147
Burr Measurement System for Drilled Hole at Inclined Exit Surface
H.P.Hoang, S.L.Ko
157
Burr Measurement: A Round Robin Test Comparing Different Methods
V.Franke,L.Leitz, J.C.Aurich
167
Deburring with CO2 Snow Blasting
E.Uhlmann,M.Kretzschmar,F.Elbing, V.Mihotovic
181
A Study on Deburring Inconel 718 Using Water Jet Technology
F.Boud,J.Folkes,N.Tantra,S.Kannan, I.W.Wright
189
Ice Blasting – An Innovative Concept for the Problem-Oriented Deburring of Workpieces
B.Karpuschewski, M.Petzel
197
Study of Internal Deburring of Capillary Tubes with Multiple Laser-machined Slits
H.Yamaguchi, J.Kang
205
Robotic Deburring Based on On-line Burr Measurement
L.Liao,F.Xi, S.Engin
213
Deburring Machine for Round Billets – Equipment for Efficient Removal of Burrs from Billets
M.Schnabl
221
Formulation of the Chip Cleanability Mechanics from Fluid Transport
S.Garg,D.Dornfeld, K.Berger
229
Burr Minimization and Removal by Micro Milling Strategies or Micro Peening Processes
A.Kienzler,M.Deuchert, V.Schulze
237
Assessment of Deburring Costs in Industrial Case Studies
P.J.Arrazol
245

©2010 AES
rev 3/5/2010